基于神经网络与光纤传感阵列的结构状态监测方法

以探测机敏复合材料与结构内应变、应力及损伤等物理状态的位置信息为目的．提出了一种新颖的可内埋于材料与结构内作为结构状态监测用的强度调制型光纤传感阵列网络，并采用人工神经网络来处理传感阵列输出的并行分布式传感信号，阐述了适用的Ｋｏｈｏｎｅｎ网模型及其变化形式，给出了仿真实验结果     

中国科大光力学工作进展

中国科学技术大学光力学实验室近年从事实验力学方法在红外成像、金属物理学以及生化传感等交叉领域的研究，为实验力学带来了新的研究内容，也为相关领域的研究开辟出独特的途径。本文拟对该小组近年来取得的研究进展作一个概述：1）提出微梁阵列FPA变形的高灵敏光学检测法，设计制作出相应的FPA，实现了新概念光学读出红外成像，热成像指标处于国际领先；2）提出用动态散斑研究合金材料锯齿形屈服剪切带，建立了溶质原子与位错交互作用的动态应变时效模型，再现出锯齿形加载曲线和带反复传播的轨迹；3）提出用微梁传感研究大分子／蛋白质构象折叠，检测到构象转变过程中分子间力的相互作用信息和折叠动力学过程，为研究大分子折叠机理提供了一种新途径。     

The role of cloud tracking and passive microwave techniques in the short-term prediction of flood hazard on a regional scale

The role of remote sensing in enhancing the monitoring capabilities and the short-term prediction of the risk of flooding on a regional scale is addressed in this paper by means of the application of storm identification and cloud tracking techniques to a few case studies where cluster analysis based on infrared satellite imagery is used as the primary source of information. Polar satellite sensors, which provide passive microwave images, were also proposed in the literature for application in flood forecasting operational problems, though the accuracy of passive microwave techniques is only acceptable when rainfall estimates are integrated over quite large spatial and temporal scales. Climatological studies are well suited to make use of such data while the measure of instantaneous rainfall is still lacking of an adequate validation. A theoretical and numerical framework for the assessment of the reliability of passive microwave estimates of instantaneous rainfall within the typical resolution scales of polar satellite sensors is provided in the paper.

---

Sommario Il ruolo delle tecniche di monitoraggio da sensori remoti nell'incrementare le potenzialità di previsione a breve termine del rischio di inondazione a scala regionale è analizzato nel presente lavoro attraverso l'applicazione di tecniche di identificazione ed inseguimento dei corpi nuvolosi ad alcuni casi di studio in cui le immagini satellitarie nella banda dell'infrarosso termico sono utilizzate come principale strumento di monitoraggio. In letteratura viene inoltre proposta l'utilizzazione, in applicazioni operative di previsione delle inondazioni, di sensori alle microonde passive montati su satelliti ad orbita polare: l'accuratezza di tali tecniche è tuttavia accettabile solo quando le stime di precipitazione vengono integrate su ampie scale spaziali e temporali. Mentre l'uso di tali tecniche per studi climatologici è di notevole utilità, la misura della precipitazione alle piccole scale spazio-temporali necessita ancora di un adeguato processo di validazione. Nel presente lavoro viene proposto un approccio teorico per la stima dell'affidabilità di tali stime di precipitazione alle scale tipiche della risoluzione spaziale del sensore.

     

遥感技术用于固体力学实验研究的新成果

在岩石、混凝土和钢材加载直到破坏的过程中用红外和微波遥感技术进行了观测研究．发现这些材料在加载过程中其红外和微波辐射温度、红外辐射波谱及红外热像均随应力的变化而变化．材料破坏前这些变化表现出某些前兆性特征．研究表明遥感技术可作为固体力学研究的一种新手段，并可望在工程上得到应用     

Interaction of different types of nanocages (Al12N12, Al12P12, B12N12, Be12O12, Mg12O12, Si12C12 and C24) with HCN and ClCN: DFT,TD-DFT,QTAIM, and NBO calculations

In this work, the ability of different types of nanocages including Al₁₂N₁₂, Al₁₂P₁₂, Be₁₂O₁₂, B₁₂N₁₂, Si₁₂C₁₂, Mg₁₂O₁₂ and C₂₄ for the adsorption and detection of poisonous gases HCN and ClCN has been investigated, theoretically using the D3 dispersion corrected density functional theory (DFT-D3). The absorption spectra of HCN–nanocage and ClCN–nanocage complexes were calculated by the time-dependent density functional theory (TD-DFT) and compared with the calculated absorption spectrum of isolated nanocage to investigate the ability of nanocage for sensing of HCN and ClCN gases. It was found that the strongest interaction between HCN (ClCN) molecule and nanocage takes place when the molecule is adsorbed via its N atom on the surface of nanocage except for C₂₄. Also, it was shown that the Al₁₂N₁₂ is the best adsorbent for HCN and ClCN gases among the selected nanocages and Si₁₂C₁₂ is the best sensor for the detection of these gases using the electroconductivity and absorption spectroscopy techniques.     

六方相LaOF∶Er,Yb的上转换发光及温度传感特性

氟氧化物兼有氧化物优异的稳定性和氟化物的低声子能量,是上转换发光材料的一种热点基质材料,因而研究六方相LaOF∶Er,Yb的上转换发光性能及其温度特性具有重要意义。本文采用水热法制备了六方相LaOF∶Er,Yb荧光材料,通过X射线衍射(XRD)、扫描电镜(SEM)和荧光光谱对其结构和上转换荧光性能进行表征。实验结果表明,水热法120℃得到六方相LaF3,经800℃和1000℃退火后分别形成四方相LaOF和六方相LaOF。980 nm激发下,六方相LaOF∶Er,Yb中Yb3+与Er3+存在能量传递,通过双光子吸收产生绿光和红光的上转换荧光,并且Yb3+与Er3+的最佳浓度分别为3%和1%。最后研究了六方相LaOF∶Er,Yb在温度传感方面的应用,其在150~400 K温度范围的相对灵敏度和绝对灵敏度分别为0.037 K-1和0.0043 K-1。该材料具有优异的温度传感特性,对荧光温度传感器件的设计和应用具有指导意义。     

激光雷达扫描方式

为实现激光束对空域的有效扫描和探测,研究了栅形扫描、李萨茹形扫描、螺旋形扫描和六边形扫描四种常见的激光雷达扫描方式,推导了相应的扫描方程,讨论了参数的物理意义及调整方法;重点研究了栅形扫描和六边形扫描方式下光斑的分布情况,通过仿真分析了两种扫描方式下光束的漏扫率和重叠率,结果表明,在相同扫描条件下六边形扫描方式的漏扫区域最少。展示了基于上述研究内容的扫描控制系统实物图及扫描图案。分析总结了四种扫描方式的特点,给出了每种扫描方式的适用情况及使用建议。     

软体操作器结构设计及植入式光纤传感方法

为解决微创手术软体机器人的形状实时监测问题,将刻有三个光纤布拉格光栅的单根光纤植入软体操作器中,利用其研究柔性硅胶软体操作器光纤传感和三维形状重构方法。进行了软体操作器的结构设计及模型建立,并对光纤光栅波长漂移量和软体操作器弯曲曲率之间的关系进行了理论分析;通过实验验证了软体操作器结构设计及其模型建立的有效性,测试了软体操作器不同弯曲状态下三个FBG传感器的反射谱特征及其变化规律;通过分析三个FBG传感器的中心波长漂移量,利用线性插值算法计算出软体操作器在不同弯曲状态下的曲率等参数,并结合曲线拟合方法实现软体操作器的三维形状重构。实验结果表明:植入式光纤光栅传感方法可以实现硅胶软体手术操作器的三维形状传感,在微创外科手术领域具有广阔的应用前景。     

工业SO2及碳黑颗粒紫外成像遥感监测技术

为了准确有效监测工业烟囱排放,基于SO2及碳黑颗粒物的光学特性,设计并研制出一套双通道紫外成像遥感监测系统.该成像系统的两个光谱通道的中心波长分别定于310 nm和330 nm,利用两个通道的光学厚度之差反演SO2浓度图像,颗粒物浓度图像由330 nm通道获取,根据浓度图像结合光流法获取烟羽运动速度,进而计算得出SO2和碳黑颗粒物的排放速率.结果表明,该工业烟囱的SO2及碳黑颗粒物排放速率分别为72.48±3.16 kg/h和6.33±1.18 kg/h.实验采用紫外相机同时对工业烟囱排放的SO2及碳黑颗粒物进行监测,实验表明双通道紫外成像遥感监测兼具高时间分辨率与高空间分辨率,测量结果准确直观,在工业废气污染、船舶尾气污染以及火山喷发污染排放遥感监测中具有非常明显的技术优势及巨大的应用前景.     

High sensitive and large dynamic range quasi-distributed sensing system based on slow-light π-phase-shifted fiber Bragg gratings

In this paper, we theoretically analyze the slow-light π-phase-shifted fiber Bragg grating (π-FBG) and its applications for single and multipoint/quasi-distributed sensing. Coupled-mode theory (CMT) and transfer matrix method (TMM) are used to establish the numerical modeling of slow-light π-FBG. The impact of slow-light FBG parameters, such as grating length (L), index change (Δn), and loss coefficient (α) on the spectral properties of π-FBG along with strain and thermal sensitivities are presented. Simulation results show that for the optimum grating parameters L = 50 mm, Δn = 1.5×10⁻⁴, and α = 0.10 m^-1, the proposed slow-light π-FBG is characterized with a peak transmissivity of 0.424, the maximum delay of 31.95 ns, strain sensitivity of 8.380 με^-1, and temperature sensitivity of 91.064 °C^-1. The strain and temperature sensitivity of proposed slow-light π-FBG is the highest as compared to the slow-light sensitivity of apodized FBGs reported in the literature. The proposed grating have the overall full-width at half maximum (FWHM) of 0.2245 nm, and the FWHM of the Bragg wavelength peak transmissivity is of 0.0798 pm. The optimized slow-light π-FBG is used for quasi-distributed sensing applications. For the five-stage strain quasi-distributed sensing network, a high strain dynamic range of value 1469 με is obtained for sensors wavelength spacing as small as 2 nm. In the case of temperature of quasi-distributed sensing network, the obtained dynamic range is of 133 °C. For measurement system with a sufficiently wide spectral range, the π-FBGs wavelength grid can be broadened which results in substantial increase of dynamic range of the system.